Back Support Hardware Options - Quad Mount
Quad Mount is the default and most commonly prescribed hardware for the Spex Back Support range. It uses four independent points of attachment to the back support canes of the wheelchair for ultimate strength and lateral positioning.
This hardware type offers 40mm of seat depth adjustment, and is available in three different variants:
Quad Mount Quick-Release / Default: Has a unique locking system that allows the back support to be removed easily
Quad Mount Heavy-Duty: Features the same benefits as Quick-release and supports heavier users with it's stronger L-brackets. Required for back supports over 20" wide and/or over 23" high and/or users who exert high loads on their seating.
Quad Mount Fixed: Back support is non-removable without the use of tools but is lighter (and a more cost-effective option). Limited adjustability and back angle.
Functional Benefits

10° of back angle adjustment

Locking system to prevent back support falling forward

4 sturdy attachment points

Logical install mounting pegs
Specifications
Depth Adjustment | Back Angle Adjustment | Weight | Part Code | |
Quad Mount | 40 mm | 10° | 0.9 kg | 1259-2400-100 |
Quad Mount for Adapta | 40mm | 10° | 0.9kg | 1259-2404-100 |
Quad Mount Heavy Duty | 40 mm | 10° | 1.1 kg | 1259-2405-100 |
Quad Mount Fixed | 40 mm | Non-adjustable | 0.6 kg | 1259-2470-100 |
Direct Mount | Non-adjustable | Non-adjustable | 0.6 kg | 1259-2460-100 |
Quad Mount Extensions
Upper extensions for increasing back angle to 20° (extra 10°) | Upper and lower extensions for increased seat depth (extra 100 mm / 4") |
1259-2450-100 Set of 2, weighs 0.1 kg | 1259-2452-100 Set of 4, weighs 0.2 kg |
Customisations
Quad Mount Width Extensions

Quad Mount Depth Extensions

Use one set to increase back angle by 10˚(set of 2 for upper mounts)
Use two sets to increase seat depth by 4" (set of 4 for all mounts)