Spex Standard Contour Cushion
Spex Cushion Technology
The Spex cushion is designed to create the optimum pelvic foundation for the wheelchair user. Well established and preferred by many professionals for its capacity to adjust on-the-spot in solving for both symmetrical and asymmetrical sitting postures. Spex cushion technology provides the key solution to positioning and levelling the pelvis correctly and effectively by strategic placement in the adjustable base cell system to further contour the cushion for correction or control.
The technology of the construction produces a broad distribution pattern with low peak pressures, and pressure analysis data suggest that the pressure distribution characteristics of the Spex cushion makes it an excellent candidate for people that are at risk of skin ulcers. Further pressure management and pressure redistribution is adjusted by simply rearranging and modifying the cells at any time.
Comes with washable Spacer fabric cover and BONUS incontinent cover
Accommodate or correct pelvic obliquity
Decrease leg flexion by building up rear of cushion
Increase leg flexion by building up front of cushion
Create pre-ischial support
Designed for the user who has moderate to severe positioning and pressure requirements. Excellent choice for individuals who:
- Have changing postural needs over time.
- Have a symmetrical or asymmetrical sitting posture that requires correction or control.
- Require pelvic comfort and pressure relief/distribution.
- Require a high degree of pelvic stability and specific contouring.
- Have tight hamstrings/lack of hip flexion.
- No maintenance required. A reliable, peace-of-mind solution!
- Created as the solution-solver for asymmetrical postures.
- Strategic contouring pads offer complete customisations on-the-spot for a perfect fit for the client.
- Removable trochanter supports for pelvic obliquity or reduction, or build-up for hip flexion.
- Gel-foam ischial well evenly distributes pressure under the pelvis and reduces shear forces in sensitive areas.
- Coccyx channel for enhanced pressure relief (for sizes 16” +)
- Includes breathable ‘spacer’ fabric cover and bonus inner incontinence cover.
Strategic Positioning Base
With the proven in-built adjustable base system, the Spex cushion can be configured to solve many different pelvis needs ranging from basic cushion stability up to difficult pelvic situations.
Modifications by strategic placement in the adjustable base cell system further contour the cushion for correction, control, balance, stability, pressure redistribution and many other needs.
With adjustment being done at the base of the cushion, the upper foam layers are unaffected and don’t cause bottoming-out or further pressure risks.
Configurations can be easily made so pressure is redistributed from the ischial tuberosities and coccyx onto the trochanters and femurs for enhanced load bearing and stability.
With treating each leg independently via the cells it is easy to obtain optimum positioning and levelling the pelvis correctly and effectively, and this process can be carried out without limit by simply rearranging and modifying the cells at any time for changing postural needs.
Pressure Rating & Characteristics
Our Spex cushions have been laboratory tested in USA for pressure characteristics. Please note that this was tested using a standard Spex cushion without any contouring done to the positioning base.
Data demonstrated that pressure readings across all five zones (L/R Trochanter, L/R Ischial Tuberosity and Sacrum) show smooth transitions without significant peaks in pressure for both test cushions. The readings indicate good pressure distribution over the entire sitting surface.
|Width||Height||Weight Capacity||Trough Height||Product Weight|
This is used to compare the Spex products only.
Cushion Size Chart
Add a Splash of Colour!
Choose from Granite Grey, Ocean Blue, Royal Purple, Calypso Pink, Chilli Red, Mango Orange, Bumblebee Yellow, Leaf Green, or the standard Black, to brighten up your Spex cushion, back support, and head support!
|Granite Grey||Ocean Blue||Royal Purple||Calypso Pink||Chilli|
|Mango Orange||Bumblebee Yellow||Leaf Green|
Spare Cushion Outer Cover
Spare Cushion Incontinence Cover
5° Cushion Wedge
Extra Cushion Positioning Kit
Leg Length Discrepancy
A custom cut-out can be made into the cushion if the user has a leg length discrepancy. You will need to specify if this is to be on the user's left or right and the depth of the cut-out as per the dimension shown in the image. When ordering a cushion with a cut-out, order the cushion based on the seat depth of the longer leg, and then specify the cut-out as per the length of the shorter leg.
Front End Relief
Front End Relief, or a sloping front, can be achieved for users presenting with tight hamstrings or contractures. Please specify the length as shown on the image.
Custom Medial Thigh Support
A custom-sized in-built Medial Thigh Support can be specified, as per the dimensions shown on the image.
Remove Medial Thigh Support
Remove the Medial Thigh Support on the cushion so that a flat front surface is achieved without any contouring. This is a great option to facilitate easy transfers for users without natural adduction of the thighs, or if a separate flip-down pommel is going to be used.
Custom Lateral Thigh Supports
Custom-sized Lateral Thigh Supports can be specified as per the dimensions shown on the image.
Custom Hip Belt Slots
Cut-outs in the side adductors can be made into the cushion for more effective placement of hip belts and avoidance of "bridging" between the top of the user's thighs and the top of the cushion contouring. You will need to specify the location and width of the slots as per the dimensions shown on the image.
Top Surface Overlays
Additional Pressure Relieving Overlay on the top surface of the cushion.
Supracor® Honeycomb Overlay on the top surface of the cushion.
Rear Cut-Outs for Back Support Canes
If the cushion needs to extend between the back support canes of the wheelchair but will be wider than the gap between the canes, specify dimensions for cut-outs in the rear corners of the cushion.
Custom Sized Ischial Well
A custom sized Ischial Well on the rear of the cushion can be specified by using the dimensions shown on the image. The position of the coccyx ridge can be changed to the left or the right (specify the distance and direction from the centre of the ischial well to the new position).
Ischial Well Padding Inserts
Specify different padding inserts for the ishcial well of the cushion. Choose between:
- 1/2" gel foam
- 1" soft gel foam
- 1/2" waffle gel